| Search results - "and" |
Arvin 7591 SE107 viewsThis single-ended integrated amp was originally in a console, which powered left/right speakers and a center bass. It was repackaged into this small custom cabinet. The O/P tubes are 7591.
|
|
Baldwin PC 40 amps during rebuild87 viewsThese amps are in partial rebuild at this stage. Signal input RCA connector and speaker connectors are added, as are also a power switch and indicator. The amps are recapped underneath and any out-of-spec components replaced with good spec parts.
|
|
Bogen KO-10087 viewsA Pair of Bogen KO-100 100W booster amps using EL34 output tubes. The other tubes used are 2x 5R4GYA rectifiers, EZ81 rectifier, and a 6U8 per amp.
|
|
Bogen MX-60A Inside82 viewsThis is a 60W mono integrated PA tube amp that uses two 8417 tubes in Push-Pull output. It is solid state rectified and additionally has three 7247 and three 12AX7 tubes. There are 4 microphone inputs with four sockets inside for microphone transformers, plus additional inputs for Mag/Tape, 5th Mic, and two Aux with a Fader/Volume pot between the two.
|
|
Denon DCD-2000144 viewsReported to be the first commercially available CD Player and apparently a clone of the Hitachi DA-1000
|
|
Fisher KM-6085 viewsWhen found, the original wood cabinet was very badly damaged and had been painted light blue. The exterior was reworked, prepared and refinished with a gloss black paint. It was paired with the KM-60 to provide a stunning contrast to the gold face Fisher and the rear gold-finished grille.
|
|
Eico HF-85 Inputs and Outputs76 views
|
|
Klipsch La Scala273 viewsSerial Numbers 7P595 and 7P596 built in 1976
Width 23.75 in.
Depth 24.5 in.
Height 35.5 in.
Weight 123 lb.
|
|
Klipsch AA crossover recapped with Solen and Auricaps217 views
|
|
output taps and output tubes45 views
|
|
Sherwood 2000 Tuner and S-4400 Amplifier22 views
|
|
Sherwood S-5000 S-2000 and S3MX15 views
|
|
|
|
